AMERCOAT 68 G
Low VOC Zinc Rich Epoxy Primer
- High metallic zinc content in the dry film
- Combines epoxy's toughness with zinc's superior protection
- Outstanding resistance to severe weathering
- Superior performance in industrial and marine environments
- Easily applied by airless or conventional spray
Volume Solids% (ISO 3233) |
62 |
Dry Film Thickness (µm) |
75 |
Theoretical Coverage (m²/l) |
8.3 |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
10 |
Thinner /Cleaner |
Amercoat 9HF |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 71 TC
Polyamide Cured Epoxy Tiecoat
- A superior epoxy polyamide tiecoat
- Forms durable coating systems with a wide range of topcoats for immersion and non-immersion services
- Suitable for variety of non-ferrous substrates
- Tiecoat over Dimetcote range of zinc silicates
- Tieocoat between epoxy anti-corrosive coatings and antifoulings
Volume Solids% (ISO 3233) |
51 |
Dry Film Thickness (µm) |
50 |
Theoretical Coverage (m²/l) |
10.2 |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 9HF / Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 90 S
High Performance Modified Epoxy
- High solids tank lining
- Excellent chemical resistance
- Suitabe for cycling and long term continuous immersion service
- Withstands continuous immersion in water up to 60°C (140°F)
- Recommended under thermal insulation on carbon steel or stainless steel up to 200°C (392°F)
Volume Solids% (ISO 3233) |
58 |
Dry Film Thickness (µm) |
150 |
Theoretical Coverage (m²/l) |
3.9 |
Mixing ratio (Volume) |
2:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 65 / Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 91
Epoxy Novolac Tank Lining
- High performance epoxy novolac also defined phenolic epoxy tanklining
- Broad spectrum of chemical resistance
- Withstands continuous immersion in deionised water up to 93°C (199°F)
- Withstands continuous immersion in hot concentrated brine up to 70°C (158°F)
- Withstands continuous immersion in hot sour crude up to 150°C (302°F)
Volume Solids% (ISO 3233) |
54 |
Dry Film Thickness (µm) |
125-150 |
Theoretical Coverage (m²/l) |
3.6(150 µm) |
Mixing ratio (Volume) |
7.3:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 65 / Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 138
Epoxy Preconstruction Primer
- Use as a weldable preconstruction primer or field or shop applied primer
- Permits almost immediate handling,welding, cutting and fabricating
- Can be used with a wide range of topcoats
- Easily applied by automatic spray equipment
- Chromate and lead free
Volume Solids% (ISO 3233) |
23 |
Dry Film Thickness (µm) |
15-25 |
Theoretical Coverage (m²/l) |
11.5(20 µm) |
Mixing ratio (Volume) |
5:2 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 14 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
TIDEGUARD 171 A
Solvent Free Epoxy Cladding
- 100% volume solids, no VOC emission
- Spray applied epoxy cladding
- Long lasting economical splash zone protection
- Resist impact and abrasion
- Non skid corrosion resistant epoxy cladding for decks, mudroom floors, walkaways and helidecks
Volume Solids% (ISO 3233) |
100 |
Dry Film Thickness (µm) |
4.5 mm +- 1.5 mm |
Theoretical Coverage (m²/l) |
per 20kg:2.4m² at 4.5mm |
Mixing ratio (Weight) |
15.00:3.30:1.7 |
Packing Size (kg) |
20 |
Thinner /Cleaner |
|
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 182ZP HB
Polyamide Cured Epoxy Primer
- A high build anti-corrosive primer
- Forms durable coating systems with wide range of topcoats
- Excellent shopprimer in corrosive environments
- Tiecoat over Dimetcote with suitable Amercoat topcoats
Volume Solids% (ISO 3233) |
55 |
Dry Film Thickness (µm) |
100 |
Theoretical Coverage (m²/l) |
5.5 |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 9HF/ Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 235
Low Temperature Cure Epoxy
- Salt and fresh water resistant
- High performance, self priming multi-purpose epoxy
- Can be applied over mechanically cleaned steel and suitable preopared concrete
- Adheres to most types of existing coating systems
- Cures even below 0°C
- If required Amercoat 235 can be overcoated with a wide range of topcoats
- Fast dry, cna be recoated after 4 hours
Volume Solids% (ISO 3233) |
68 |
Dry Film Thickness (µm) |
100-200 |
Theoretical Coverage (m²/l) |
6.8(100µm) 3.4(200 µm) |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 65 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 253
Chemical Resistant Lining
- High Solids, high performance epoxy novolac also defined as phenolic epoxy tankling
- Exceptional resistance to a broad range of chemicals, solvents and fuels
- Two or three coat system
Volume Solids% (ISO 3233) |
72 |
Dry Film Thickness (µm) |
100-150 |
Theoretical Coverage (m²/l) |
57.0 (100 µm) 4.7 (µm) |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat T-10 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 325
Polyamide-cured Coaltar Epoxy
- 400 microns of protection in only one coat, thereby eliminating intercoat adhesion problems of two-coat coaltar epoxies
- One coat application significantly reduces labour cost.
- Superior application by airless and conventional spray
- For immersion , tanklining and non-immersion service
- Broad chemical resistance
Volume Solids% (ISO 3233) |
76 |
Dry Film Thickness (µm) |
400 |
Theoretical Coverage (m²/l) |
1.9 |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 65 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 346
Phenolic Epoxy Tank Coating
- High Solids modified phenolic epoxy
- Versatile tanklining for interior of ships tanks, barges, tank cars and storage tanks
- A tough and durable abrasion resistant tanklining eith excellent chemical resistance
Volume Solids% (ISO 3233) |
73 |
Dry Film Thickness (µm) |
100 |
Theoretical Coverage (m²/l) |
7.3 |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 9HF/Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 352
100% Solids Epoxy Tank Coating
- High build, 100% solids epoxy
- Immersion resistant to water and fuels
- Excellent barrier properties
- Standard airless application
- Easily cleaned, abrasion resistant
- Can be applied up to 3mm thick on horizontal surfaces
Volume Solids% (ISO 3233) |
100 |
Dry Film Thickness (µm) |
250 |
Theoretical Coverage (m²/l) |
4 |
Mixing ratio (Volume) |
3:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
N/A |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 352 GF
Solvent Free Epoxy Glassflake
- High build epoxy, 100% solids content
- Excellent resistance to water
- Excellent barrier properties
- Glass flake reinfoced
- Easiliy cleaned, abrasion resistant
- Does not require high temperature for curing
Volume Solids% (ISO 3233) |
100 |
Dry Film Thickness (µm) |
500-1000 |
Theoretical Coverage (m²/l) |
2 (500 µm) 1 (1000 µm) |
Mixing ratio (Volume) |
2:1 |
Packing Size (ltr) |
10 |
Thinner /Cleaner |
N/A |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 383 H
High-build Epoxy Intermediate coating
- High build epoxy intermediate coating
- Reduced volatile organic compounds (VOC)
- High-build and High-Solids
- Tough and durable
- Also available with 40% MIO pigmentation
Volume Solids% (ISO 3233) |
77 |
Dry Film Thickness (µm) |
100-200 |
Theoretical Coverage (m²/l) |
7.7 (100 µm) 3.8 (100 µm) |
Mixing ratio (Volume) |
1:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 65/ Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin | MSDS Cure |
AMERCOAT 383 HS MIO 80
Micaceous Iron Oxide Epoxy
- Economical long term protection in only one coat
- Trouble-free application directly over inorganic zinc primers
- Excellent durability in marine atmosphere
- Accepts urethane, polysiloxane or acrylic topcoats where improved gloss and colour retention are required
- Contains 80% micaceous iron oxide on total pigment
Volume Solids% (ISO 3233) |
63 |
Dry Film Thickness (µm) |
125 |
Theoretical Coverage (m²/l) |
5.0 |
Mixing ratio (Volume) |
4:1 |
Packing Size (ltr) |
10 |
Thinner /Cleaner |
Amercoat 9HF /Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin MSDS Cure |
AMERCOAT 385
Multi Purpose Polyamide Epoxy
- Excellent durability in both marine and industrial environments
- Compatible over inorganic zincs
- Outstanding chemical and weather resistance
- Suitbale for immersion service
- Self-priming, economical, long-term protection
- Adheres to a variety of substrates such as steel, aluminium,stainless steeel, concrete and previously coated surfaces
- Also avaibale in MIO
- Also available as rusbt inhibitive pigmented version ( Amercoat 385 PA)
Volume Solids% (ISO 3233) |
68 |
Dry Film Thickness (µm) |
100-200 |
Theoretical Coverage (m²/l) |
6.8 (100 µm) 3.4(200 µm) |
Mixing ratio (Volume) |
1:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 9HF/65 /Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin MSDS Cure |
AMERCOAT 385 PA
Multi Purpose Polyamide Rust Inhibitive Epoxy
- Excellent durability in both marine and industrial environments
- Compatible over inorganic zincs
- Outstanding chemical and weather resistance
- Suitbale for immersion service
- Self-priming, economical, long-term protection
- Adheres to a variety of substrates such as steel, aluminium,stainless steeel, concrete and previously coated surfaces
- Wild film build range
- Also avaibale in MIO
- Rust Inhibitive pigmented
Volume Solids% (ISO 3233) |
68 |
Dry Film Thickness (µm) |
100-200 |
Theoretical Coverage (m²/l) |
6.8 (100 µm) 3.4(200 µm) |
Mixing ratio (Volume) |
1:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
Amercoat 9HF/65 /Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin MSDS Cure |
AMERCOAT 1972B
Solventfree Coaltar Epoxy
- Solvent free,100% solids epoxy seal-coat designed for protection of buried and subaqueous concrete pipelines
- Durable, abrasion-resistant, exterior pipe coating
- Environmental friendly, high build, 100%,solids epoxy coating with high dielectric strength unaffected by moisture or soil chemicals
- Designed for production
- Easy one-coat application
- Excellent abrasion resistance
Volume Solids% (ISO 3233) |
100 |
Dry Film Thickness (µm) |
400-1000 |
Theoretical Coverage (m²/l) |
2.5 (400 µm) 1 (1000 µm) |
Mixing ratio (Volume) |
2:1 |
Packing Size (ltr) |
20 |
Thinner /Cleaner |
NA /Amercoat 12 |
Data Sheets |
Technical Data |
|
MSDS Resin MSDS Cure |